MarinePure High Performance Ceramic Biofilter Media - 8" x 8" x 4" Block

• Initial rinse of media with water to remove surface particulate created during shipping.
  If tap water is used, perform second rinse with tank water to remove chlorine.
• Locate media in filter, sump, under gravel bed, anywhere in the tank or as part of a reef structure. Locating within the flow of the water will give the most efficient results.
• NOTE: the product is easily shaped using a hand saw or coarse sand paper. Make sure to rinse particulate before placing in tank.
  Wear a a dust mask to avoid breathing in particulate
• Mechanical filtration of water, such as with matting, is recommended prior to water entering MarinePure product

• Initial rinse of media with water to remove surface particulate created during shipping.
  If tap water is used, perform second rinse with tank water to remove chlorine.
• Locate media in a passive location such as in a sump, under gravel bed, or as part of a reef structure.
• NOTE: If desired, the product can be easily shaped using a hand saw or coarse sand paper. Make sure to rinse off particulate before placing in tank.
• Wear a a dust mask to avoid breathing in particulate

• Periodic backwashing or rinsing using tank water suggested every 3 months or as frequently as necessary.

If necessary, backwash and / or rinse as described above.

• Although product should be self-cleaning, applications and use vary.
• A weak acid can be used for cleaning, but time in acid conditions should be minimized. Make sure to wear appropriate Personal Protective Equipment when using acid.