{"product_id":"milwaukee-pro-ph-monitor-a-c-adapter-mc120-1","title":"Milwaukee MW803 MAX Waterproof Low Range 4-in-1 pH \/ EC \/ TDS\/Temp Tester with Replaceable Probe","description":"\u003cdiv\u003eDescription\nThe Milwaukee MW803 MAX Waterproof Low Range 4-in-1 pH\/EC\/TDS\/Temp Tester is designed as an all-in-one solution for growers.\n\nThe Milwaukee MW803 MAX Waterproof 4-in-1 Tester offers:\n\nAccuracy\nThe MW803 MAX 4-in-1 tester is accurate to ±0.05 pH, EC\/TDS to 2% Full Scale and ±0.5°C \/ ±1°F for temperature.\n\nWith automatic calibration and 5 memorized calibration points, the tester can be quickly and easily be calibrated to a higher accuracy compared with manual calibration.\n\nLong life\nThe tester comes with a replaceable pH probe with a double junction probe design for longer life.\n\nFast response\nAn exposed temperature probe is located close to the pH probe for fast temperature compensation.\n\nWaterproof construction\nNo more worries about dropping your tester while measuring. The MW803 is fully waterproof to IP65.\n\nLight weight\nAt just 3.5 ounces, the MW803 MAX is easy to handle at up to half the weight of other testers.\n\nEase-of-use\nA large dual level LCD screen makes reading results easy while a stability indicator and hold function that freezes the display takes the guess work out.\n\nDesign features\nFast easy to read results with large digital dual LCD readout.\nExtreme accuracy to ±0.05 pH, EC \/ TDS 2% Full Scale and Temperature ±0.5 °C \/ ±1 °F.\nRange 0.00 – 14.00 pH | EC 0 to 3999 µS\/cm | TDS 0 - 2000 ppm | Temperature: 0.0 to 50.0 °C \/ 32.0 to 122.0 °F.\nLightweight and portable at just 3.5 ounces.\nEasy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading.\nSimple push button, automatic 1 or 2 point pH calibration with 5 saved calibration points and simple 1 point EC calibration.\nAcid Based calibrations, cleaning \u0026amp; storage solutions use PH-START  add MA9010 (10.01 cal. buffer) or M10010B if Basic cal. required.\nFor EC calibration USE MA9061 1413 µS\/cm or M10031B µS\/cm.\nGel-filled, double junction pH electrode for low maintenance and high performance with exposed temp. sensor for fast readings.\nAuto shut off after 8 minutes of non-use.\nMi60P Replaceable pH electrode.\nFully waterproof to IP65.\nBattery life approx. 100 hour of continuous use (batteries included).\nCare and Use\nThe MW803 PRO Tester includes both a pH and EC electrode. Both need maintenance.\n\nAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use!\n\nEC sensors are more robust but can still be affected by residue build up.\n\nStore the pH probe in storage solution MA9015. Only use tap water short-term if MA9015 is not immediately available and NEVER store in distilled Water (DI) or Reverse Osmosis (RO) water. This will damage the sensitivity of the probe.\n\nHere are our top four tips. \n\nAlways store upright with the cap full of MA9015 Storage solution for BEST RESULTS.\nClean your Tester regularly by soaking in cleaning solution MA9016. Cleaning Solution for about 20 minutes.\nCalibrate after cleaning and\/or storage before testing to adjust for changes in the pH sensor.\nGently stir the Tester in the sample for a faster result.\u003c\/div\u003e","brand":"Champion Lighting \u0026 Supply","offers":[{"title":"Default Title","offer_id":67797141258536,"sku":"MWMW803","price":219.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1010\/6293\/4824\/files\/Milwaukee_mw120_pro_ph_monitor_1.jpg?v=1790885538","url":"https:\/\/bubbleflowaquatix.com\/products\/milwaukee-pro-ph-monitor-a-c-adapter-mc120-1","provider":"Bubble Flow Aquatix","version":"1.0","type":"link"}